Tri-Fold Blind Rivets
Blind Rivet Terms
Rivet Body
Aluminium – Lightweight with good corrosion resistance.
Steel – Stronger than Aluminium with a “flash” coating of Zinc. Low corrosion resistance.
Stainless Steel A2 – Good Strength and excellent corrosion resistance.
Stainless Steel A4 – Good Strength and increased corrosion resistance
Copper – Relatively soft. Excellent corrosion resistance and conductivity.
Monel – The strongest blind rivet material with excellent corrosion resistance and conductivity. Also excellent high temperature suitability.
Tre-Go Blind Rivets
The Tre-Go Blind Rivets are high strength rivets that are both vibration and weather proof through their fitted neoprene washer. Ideal for curved or uneven surfaces.
For a watertight joint. Especially suitable for roofing sheets.
Watch installation video below.
Triple-Claw Blind Rivets – TRI-GO
The problem solution for soft materials
Watch installation video below.
Material USAGE GUIDE
Galvanic Corrosion • When dissimilar metals come into contact in the presence of an electrolyte, a galvanic action occurs which corrodes one metal at a faster rate and the other more slowly. This phenomenon can cause major riveted joint failures and care must be taken to avoid the occurrence. The following table is a guide.
METAL JOINED | |||||
RIVET MATERIAL↓ | Aluminium | Coated Steel | Stainless Steel | Copper | Brass |
Aluminium | YES | CARE | NO | NO | NO |
Coated Steel | NO | YES | NO | NO | NO |
Stainless Steel | CARE | CARE | YES | YES | YES |
Copper | NO | NO | YES | YES | YES |
Monel | NO | NO | YES | YES | YES |
YES | Compatible | ||||
NO | Incompatible – Avoid contact with each other | ||||
CARE | Use with care. Painting metals will help |
Hence,
1) Select materials that are as close together as possible in the Galvanic
Series Chart
2) Provide a barrier between the two metals, such as paint, non-metallic
washer or gaskets
3) Design the fastener as the cathode so the cathodic area is small as
compared to the anodic area
4) Use a metallic finish on the fastener that is close on the chart to the
mating material