QUALITY FASTENERS MART

​​​J C GUPTA & SONS

Advantages :
• Easy to assemble with any squeeze press

• High torque resistance
• No damage to decorative finishes on panels
• Visual proof of security
• Always perpendicular to panel
• Head installs flush with surface of sheet

Useful in aluminum, carbon steel, stainless steel and PCBLN


Thread sizes from M2.5 to M8

BLIND STANDOFFS

Advantages :
• Available in a range of spacer lengths
• Remains mechanically clinched in sheet
• For heavy duty applications
• LSS (Larger support surface) types are available
• Available in through threaded and blind threaded ranges
• Available in plain hole .

*Self-Clinching Standoffs serve as spacers or distance pieces.

*Most commonly used when a component requires to be stacked away or space away from the panel.

A simple squeezing action embeds the hex head in the sheet.

*This causes the displaced metal to flow into the clinching groove.


Blind and through-threaded fasteners are commonly used.



Standoffs  -  JC-SO  JC-BSO  JC-SOS  JC-BSOS

CLINCH  STANDOFFS

THROUGH STANDOFFS

CLINCH STUDS

Item Code: A2E15
These provide permanent male threads in thin metallic/ non-metallic sheets.

Easily installed and permanently in drilled or punched holes.

Transfers excellent push-out and torque-out capacity.


Sizes Available
Metric - M2 to M10

CLINCH NUTSSS 400 Series SP

Item Code: B7C39


The SP type 400 series stainless steel clinch nuts are a special type suitable for use in stainless steel sheets. These are presently available in Metric sizes.

Sizes Available
Metric - M2 to M10
Unified Series - 2-56UNC to 3/8"UNC

CLINCH NUTS  SS 300 Series CLS

Item Code: A2C39


The 300 series nuts are used on Aluminum and Steel sheets. Made to the correct PEM specifications, our clinch nuts are available in Metric and Unified Series threads

Sizes Available
Metric - M2 to M10
Unified Series - 2-56UNC to 3/8"UNC

CLINCH NUTS  MS ZINC PLATED

Item Code: A2C39


Self-clinching nuts provide permanent load-bearing threads in fiberglass sheets apart from thin metal sheets.

*Easily installed by pressing in a punched or drilled hole.

*Self Clinching nuts useful for most metal sheets and plates.


Self Clinching Fasteners are easy to install fasteners that provide load carrying threads in metal sheets too thin to be tapped. These nuts, studs, spacers, standoffs and other components are used worldwide by producers of Telecom, Computer, Medical, Automotive And Aerospace Systems etc.
Advantages:
* Optimal Performance in Thin Sheet and Aluminum Sheet Applications.
* Easy installation
* High pushout and torque out resistance
* No retapping necessary
* Reverse side of sheet remains flush
* Low installed cost

SELF CLINCHING FASTENERS