QUALITY FASTENERS MART

​​​J C GUPTA & SONS

BAERFIX SELF TAPPING SOLID INSERTS WITH CUTTING HOLES

Item code: C09

BaerFix self tapping thread inserts with cutting holes are constructed specially for materials with difficult machining characteristics. The thick wall allows higher cutting forces, which are distributed over three cutting holes.

Features

  • Create wear free and vibration resistant bolted connections because of its close tolerances and self tapped thread.
  • ​Has a large effective surface, ensuring a higher degree of pull-out strength; i.e. an M5 is often sufficient instead of a cut M6 thread
  • Can withstanding high loads. Eg: when used in light alloys, a degree of pull-out strength is achieved which far exceeds the yield strength of an 8.8 class screw.
  • Reduces the material required, saving space, weight and costs
  • Provides a secure and high-strength anchor. 
  • Has high loading capacity in materials with low shearing strength.
  • Available from M3 to M16

THREAD REPAIR KITS

THREAD REPAIR WORKSHOP KITS


BaerFix thread inserts are also available in the form of thread repair kits to enable the repair of damaged threads. The Kits come complete with the correct drill bit, tap and inserting tools required to repair the damaged threads. A wide range of thread repair kits for all your damaged thread problems available in ready stock. In machinery maintenance, this is the ultimate indispensable partner for thread repair.


Features

  • All the tools required for thread repair are available in one handy kit
  • Rejected parts can be saved while maintaining the original size
  • Expensive replacement of components is thus avoided
  • Thread is strengthened in its pull out and corrosion resistance
  • Available from ​​M2 to M16
  • Also available as workshop kits, which contain a range of sizes in one kit.


Also see BaerCoil Wire Thread Inserts for thread repair.

Application areas

  • Automobile industries : Engine, Transmission, Body Parts, Radiator, Oil Drain, Spark Plug etc.
  • Medical Devices, Electronic and Laboratory Technology, Capacitors, Casings.
  • Pumps, machine construction, components
  • Household appliances: vacuum cleaners, mobile phones, washing machines, electric iron etc.
  • Military equipment, airplanes, tanks, scopes etc.

​Materials Available

Case hardened Steel, zinc plated, yellow chromated

​Stainless Steel - AISI-303

On Request:

Brass

Range

M2 to M24

​On Request:

4-40UNC to 5/8"-11UNC

​4-40UNF to 5/8"-11UNF

Fine Pitch for Spark Plugs

Thread Reinforcement

  • Reinforces and increases the pull-out strength especially in materials with low shear strength
  • Provides a better balance strength distribution
  • Greater effective shear surface
  • Protection against wear of thread
  • Higher corrosion resistance
  • Helps in reduction of weight and space thus minimizing total cost

Thread Repair

  • Facilitates the repair of damaged or worn threads
  • Salvages rejected parts while maintaining the original thread size
  • Increases pull-out strength of the thread
  • Corrosion resistance

BaerFix inserts are well suited for use in:

  • Aluminium and Aluminium Alloys
  • Brass, Bronze and cast-iron
  • Magnesium Alloys
  • Thermosettting plastics and thermoplastics​​

Also see BaerCoil Wire Thread Inserts for thread repair.

BaerFix are self tapping inserts from BAER, Germany, that are designed to cut their own threads as they are being driven into a drilled hole (self tapping). This provides a secure and high strength anchor in the parent material. BaerFix inserts do not require special tools for tapping. BaerFix is typically used for thread repair and thread reinforcement.

BAERFIX SELF TAPPING SOLID INSERTS WITH CUTTING SLOTS

Item code: C04

BaerFix self tapping inserts have a conical lead with cutting slots on the metric external thread and are designed to cut their own threads as they are being driven into a drilled hole (self tapping).

Features

  • Creates wear free and vibration resistant bolted connections because of its close tolerances and self tapped thread.
  • In some cases, the insert has a minimal inward springing actions, which creates a screw locking effect.
  • ​Has a large effective surface, ensuring a higher degree of pull-out strength; i.e. an M5 is often sufficient instead of a cut M6 thread
  • Can withstanding high loads. Eg: when used in light alloys, a degree of pull-out strength is achieved which far exceeds the yield strength of an 8.8 class screw.
  • Reduces the material required, saving space, weight and costs
  • Provides a secure and high-strength anchor. 
  • Has high loading capacity in materials with low shearing strength.
  • Available from M2 to M16
  • Available on request
    • 4-40UNC to 5/8"-11UNC 
    • 4-40UNF to 5/8"-11UNF

SELF TAPPING INSERTS - BAERFIX